XVision XC960S30, Руководство пользователя

Страница: 16 / 20

XC960S30
16
www.xvision.com
5.7 Alarm Linkage - Not supported (we recommend usgin our XSDA-2 for alarm in and out functions)
Option: Alarm Input / Input Type / Arming Time /
Preset Scan / Pattern Scan / Zone Scan / Alarm Output
The alarm linkage option allows you to set an adjust the alarms on the scannning modes.
Alarm Input: Set up to 2 alarm input numbers
Input Type: NO/NC
Arming Time: Set the arming time (Hours:Minutes)
Preset Scanning: Set alarm linkages on the preset location scans.
(0-4). To do this, select ‘1’ to set an alarm for preset scan 1.
For no alarm, select ‘0’.
Pattern Scanning: Set alarm linkages on the pattern location
scans (0-4). To do this, select ‘1’ to set an alarm for pattern
scan 1. For no alarm, select ‘0’.
Zone Scanning: Set alarm linkages on the zone location scans
(0-4). To do this, select ‘1’ to set an alarm for zone scan 1. For no alarm, select ‘0’.
Alarm Output: Turn the alarm output on or off.
Exit: End and return to the previous menu.
Save: Save the settings and exit the submenu
ALARM IN: 1
IN TYPE: NO
ARM STA: DISARMING
PRESET NO: 00
PST SCAN: 00
PATT SCAN: 00
ZONE SCAN: 00
ALARM OUT: OFF
EXIT
SAVE
5.8 Language Setting Option: Language set
Open the language settings to change the language displayed on the OSD menu.
Language: Change the language from Chinese or English
Exit: End and return to the previous menu.
Save: Save the settings and exit the submenu
LANGUAGE: ENGLISH
EXIT
SAVE
5.9 Default Setting Option: Default Set
Adjust the camera settings back to the factory default.
Cancel: Cancel and exit the submenu
OK: Set the camera back to factory default settings
Clear all presets: Clear all presets set on the camera
CANCEL
OK
CLEAR ALL PRESETS