XVision X2C4000BP, Руководство пользователя

Страница: 6 / 62

Introduction
This guide is for the Xvision Pro HD X2C4000 Range of IP Cameras.
It is recommended that the units are setup and tested before being mounted or installed.
These instructions are for guidance only detailed information is in accordance with the
product.
The instructions may include some technical inaccuracies or typographical errors, these
will be corrected in future updates.
The product or procedures described in the instructions may be changed or updated at
any time without prior notice. Screenshots used in the instruction are only for indications
and explanations.
Screenshots used in the instruction are only for indications and explanations.
This Manual will cover the following:
•
Schematic Diagram of XC Cameras
•
Basic setting setup
• Setting an IP address
• Active X Controls
•
Viewing on IE
•
Specifications
Pre-requisites
Note before you begin installation:
• Connect only one X2C4000 range IPC at a time to your LAN, as
all cameras share the same default IP192.168.1.168
• Screw Drivers
• Router/Switch/Hub for your LAN, this is needed to connect all Network
IP equipment together.
•
A Windows PC/Laptop on site connected to the same LAN
(Router/Switch) as your equipment.
•
Cat 5 Patch cables to connect your X2C4000 and Router/Switch all
together