XVision X100 Series, Быстрое руководство

Страница: 19 / 44

X100 Series Quick Guide
19
INSTALL
&
CONNECT
SETUP
CONFIGURE
RECORDING
SOFTWARE
8.
Connect the 12V DC Power Adaptor to the Power Cable and attach the positive (+) to VCC12 and
the negative (-) to GND as shown (
if using POE this step is not required) :
9.
Connect the LAN cable to the Network Socket.
10.
Re-attach the dome housing to the dome base.
11.
The camera is now ready for you to setup and configure your camera using your PC.
- See SETUP on page 34.
- The Auto Iris lens on the camera will require calibration before use. After you have setup and configured the
camera, please ensure you CALIBRATE the Auto Iris lens. See Appendix 1: HOW TO CALIBRATE AN AUTO IRIS LENS
on page 41.
For Audio
Connect an external Microphone for monitoring audio. Connect an audio output device such as a
speaker with an amplifier for voice alerting or for enabling the 2 Way Audio function.
See table below for details on connection.
Audio and Alarm Connections
Grouping Terminal Name Connect to:
POWER
VCC12
Positive (+) Power Cable
GND
Negative (-) Power Cable
ALARM SENSOR
DIGITAL_IN
Alarm Sensor Input
ALARM_OUT
Alarm Output
AUDIO
AUDIO_IN
External Microphone / Audio Input
AUDIO_OUT
External Speaker / Audio Out
AUDIO_GND
Audio Ground
INSTALL
&
CONNECT
Note: Incorrect wiring may cause damage to the camera. Please and - terminal connections are
fitted correctly.
+
-
VCC12
GND
DIGITAL_IN
ALARM_OUT
AUDIO_IN
AUDIO_OUT
AUDIO_GND
Power Cable Power Adaptor
(to Mains Power)