Type: Select connection type Auto/Manual/RTSP
Auto: Select this mode for peer to peer connection with built-in HUB
The Default IP address will be allocated 192.168.172.101 ~ 104 (4ch) / 192.168.172.101 ~ 108 (8 & 16ch)
automatically.
Keep default value of IPC in ID, Password, RTSP Port, HTTP port, HTTP type
If the ID and password of IPC is not the default value, the Elite NVR can't change the configuration of IPC
at "Auto" connection mode. So you will need to specify the ID and password from “Detail”
menu.
Manual: Select this mode for 3
rd
party ONVIF IPC or IPC is located in
the network connected by “Ethernet” /”Local” port.
Select the network port for the IPC you want to connect.
The IP range of Local or Ethernet PORT for the connection between IPC and
the Elite NVR should be same.
You have to use ‘Detail menu
for configuration of IPC such as port number, ID, password and
so on.
RTSP URL: Use RTSP command to make a connection with the IPC.
IP address: IP address of IP camera.
RTSP port: RTSP port number for RTSP transmission.
Input RTSP URL: Specify the command of RTSP connection. IP address and port number is automa
tically specified. [example : rtps://192.169.0.101:554/nvr_media/main/]
Apply: Save the configuration.
Cancel: Cancel the configuration.
When using RTSP to connect to the IPC you will not be able to use all features,
you will usually only get a live image, no configuration options will be available.
Detail (
): Modify the configuration of the IPC.
If the configuration (RTSP port/HTTP port/ HTTP Type / ID / password) of the
IPC is not default value, you have to modify it. [Supported model]
Set configurations [ONVIF mode]
32
