27
1)
CH: DVR channels.
2)
Trigger: The processing for alarming. Click “settings” and the below display will pop
up:
Trigger recording: Place a check mark '√' for the channel you need to trigger, when there
is an alarm on the setting channel, the DVR will send a trigger to other channels.
Snapshot: Place a check mark '√' in front the channel, when the setting channel has an
alarm, the DVR will snap a picture.
Send E-‐mail: Place a check mark '√', when there is an alarm, the DVR will send the
snapped picture to the mailbox you set.
Alarm output: Place a check mark '√', will trigger the external alarm.
Alarm output duration: Click the inverted triangle, options: 10s/ 30s/ 1min/ 3 min/ 5min/
10min/ 15min/ 30min.
Buzzer: Click the inverted triangle, options: None/10s/ 30s/ 1min/ 3 min/ 5min/ 10min/
15min/ 30min.
Pop-‐out image: Click the inverted triangle, options: None/ CH1/ CH2…
Post-‐record: Click the inverted triangle, options: 10s/ 30s/ 1min/ 3 min/ 5min/ 10min/
15min/ 30min.
Pre-‐record: Click the inverted triangle, options: None/ 5s/ 10s
Trigger PTZ: None/ Cruise line/ Preset point
Attention: Click “Apply” after setup.
