Key control panel (electronic timer)
Electronic timers Key Display Description
a. alarm key
b. duration key
c. end time key
d. present time key
e. reduction / alarm sound
select key
f. add key
g. alarm icon
h. relay icon
H
I
OW TO NSTALL
■ The oven should be rmly installed on a level place for ease of operation and
maintenance. Do not tilt the oven.
■ Do not install the oven and the power outlet onto the place where the oven may
expose to moisture or may easily be damped by water.
■ Lift the oven from the bottom or the handle holes when moving to another place.
Handle with care, do not move the oven by dragging the oven's door or its handle.
■ The front clearance of the oven when installed should be more than 80cm. The oven
is embedded in the kitchen cabinet, whose bottom board must be strong to withstand
the weight of more than 60kg;
■ The mains supply line to which the power of oven is connected must have an all-pole
circuit breaker that is able to withstand 20A or above current independently to ensure
that the power supply to the oven may be switch off upon occurrence of repair or
unexpected incidents.
Note: 1, The materials of the cabinet used in the oven installation such as wood or
adhesives must bear the temperature of above 120
.
2, In order to maintain ventilation, keep the clearance of the rear side is greater than
45mm.
3, If there are temperature appliances near by, make sure that the mounting distance is
greater than 80mm.
Removal the outer packing and the lm bag from the oven and place the oven close to
the mounting hole. Connect it to the power outlet (without power), lift the oven at the
holder with one hand and support the bottom of the oven with the other hand, then put
the oven slowly into the cabinet hole. Free one hand and push it gently to the end of the
cabinet. The front side of the oven should be placed onto the bottom board of the
cabinet. Fix the oven onto the cabinet with the cap-tted screws in the accessory
bag(see Schematic of the screws).
Page 5
Page 6
