MAINTENANCE
Cleaning
Your tool has been designed to operate over a long
period of time with a minimum of maintenance. That
said, continuous satisfactory operation depends upon
proper tool care and regular cleaning.
1. Regularly clean the ventilation channels in the tool
using a soft brush or cloth.
2. Keep ventilation slots of the tool clean at all times.
If possible prevent foreign matter from entering
the vents. After each use, blow air through the tool
housing to ensure it is free from all dust particles
that may build up.
WARNING!
Excessive build up of dust
particles may cause the tool to overheat
and fail.
3. If the enclosure of the tool requires cleaning, use
a soft, damp cloth only. Do not use solvents or
abrasive cleaners.
WARNING!
Never immerse any part of
the tool in liquid.
Supply Cords
If replacement of the supply cord is necessary, this has
to be done by a certified electrician in order to avoid a
safety hazard.
Note:
XU1 will not be responsible for any damage
or injuries caused by the repair of the tool by an
unauthorised person or by mishandling of the tool.
WARRANTY
YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A
CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR
WARRANTY. PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY
QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE.
The benefits provided under this warranty are in addition to other rights and remedies which are available to you at
law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a replacement or refund for a
major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to
a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty, however, where you have
suffered any additional direct loss as a result of a defective product you may be able to claim such expenses by
contacting our customer service helpline above.
1 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 12 months from the original date of purchase and is intended for DIY
(Do It Yourself) use only. If a product is defective it will be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: driver bits.
Ozito Industries Pty. Ltd.
25 Fox Drive, Dandenong South, Victoria, Australia 3175
WARNING
The following actions will result in the warranty being void.
• Professional, Industrial or high frequency use.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5
WARNING!
Ensure the tool is turned off
and disconnected from the power supply
before performing any of the following
operations.