14 / 26
Functions / Area of usage / Sound adjustments
Connection
Connect to input: XLR, RCA or Speaker input.
Select your local mains voltage with the power
switch.
Europe: 230Volt
US: 110Volt
Turn the main volume to a low value.
Connect the power cable and turn the main switch
on. Now the LCD display show "INPUT Gain".
How to control the
functions
Functions that indicated on the LCD display can be
controlled by buttons below LCD display or via the
PC-remote program.
PC-Remote is a software allowing you to
control 99 W12 DSP from a PC.
You can sit in listening position and do all
settings.
The program is in price included but you
need to download it from www.xtz.se
The manual for PC-remote can you also
download from
www.xtz.se
Select function
With the "FUNCTION"-buttons, you select which
function you want to change
Select value
With the "VALUE"-buttons, you select which value
you want for each function.
One push = One step
Hold down the button = Quick step.
Function 1
INPUT - Gain
Adjust the input gain.
The level indicates the input gain on the display.
In the left bottom corner of the Function 1 display
the number of recently selected preset (e.g. P4) and
the time of day is shown.
One step = 0,1 dB
How to use function 1
The level indicates the signal level at the input of
the DSP module. In order to get the best signal-to-
noise ratio it is very important to adjust the proper
gain. You should try to adjust the Gain with the
Value buttons as high as possible, but just below
getting the red LED ("clip") is flashing.
Do the following:
1. Turn the main volume to zero (
0
) or low level
with the volume knob.
2. Play a laud music CD observing the “INPUT
GAIN” LED display while you adjust the Gain with
the “VALUE” buttons. All, but the red LEDs should
flash or be on. If the red LED (“Clip”) turns on
decrease the “Gain” with the “VALUE” buttons
appropriately.
Use a music CD with high output level.
If you not want to play music loud, you can do the
same operation with the main speakers
disconnected.
The level should be as high as possible but without
the red Input Gain is getting on, this gives the best
signal/noise ratio.
Adjust main volume with the volume knob.
