12 (16)
Connecting
Active drive
When using active drive, make sure that the
active cross over has the correct settings
before connecting to XTZ Divine 100.49
A broken driver due to incorrect connection
is not covered by warranty!
It is important that the connection is done in a
correct way. An incorrect connection can destroy
the drivers
.
Using active drive:
•
Remove all links/jumpers plates above the
terminal screws.
•
Connect each speaker cable to the
terminal screws for each range. To the
lower part of the terminal plate
Make sure that the active filter has the
correct configuration and check that all
connections are done in a correct way.
Semi Active Drive
It is popular to run the woofers active. With the
construction that XTZ divine 100.49 have, this is
easy. This gives an opportunity to use an amplifier
or separate sub amplifier with DSP/room
compensation for the woofers.
Make sure that jumpers have the correct
configuration for a semi active drive.
NB!
A broken speaker that is caused by a
connected in an incorrect way is
NOT covered by warranty.
Be careful when connecting the speakers
when using active drive. Make sure to
read the manual of the active cross over
before connecting.
Active connection is done on the lower
part of the speaker terminal. See picture
below.
Picture below shows a setting for semi-
active drive, where the woofers are driven
active.
