background image

8

PRACTICE OF SOUND / INSTALLING AND PLACING TIPS

This chapter contains common information on loudspeaker placement 

and installation. 

IN WHICH ROOM DO YOU 

ACHIEVE THE BEST SOUND?

No  matter  how  good  the  equipment  is,  in  the  wrong  listening 

environment it will inevitably sound bad. There are some basic rules 

concerning  a proper loudspeaker installation.

REFLECTIONS

Carpets, curtains and soft furniture absorb midrange and high frequency 

sound,  and  this  is  preferable.  A  large  empty  area,  on  the  contrary,  

reflects it and produces a hard sound that may lead to a blurry dialogue. 

Apart from coloring the  sound, also the perspective of the sound will 

deteriorate.

AMPLIFICATION OF BASS 

FREQUENCIES

A loudspeaker that is placed near a wall, ceiling or floor will be amplified 

in the lower frequencies in a sometimes not desirable way (since it may 

lead  to    an  indistinct  sound  recreation).  This  amplification  becomes 

even more obvious if the loudspeaker is placed near a corner. Thus, for 

a sound as clear as  possible, the loudspeaker should be placed about  

30 cm (about 12 inches) away from the wall.

However, there are exceptions from this rule. For  some type of walls / 

rooms it may be advantageous to place the loudspeaker closer to the 

wall.

FURNITURE

Be aware that furniture may vibrate and thus create bad low frequency 

sound.

ROOM DIMENSIONS

Quadratic rooms or rooms where the length is  exactly twice as long 

as the width should be avoided, since they may create unwanted res-

onance.

PLACING THE 

LOUDSPEAKERS

How the loudspeakers are placed towards the  listener is of great im-

portance.

THE FRONT SPEAKERS

For stereo listening the loudspeakers should be  placed symmetrically in 

front of the listener. The  distance between the loudspeakers should be 

about 80% of the distance between the listener and one loudspeaker, or 

put in another way: the angle  between the loudspeakers, as seen from 

the listener, should be about 45 degrees. This means for example that if 

the distance between the loudspeakers is 2 meters, the listener should 

be placed 2.5 meters from the loudspeakers.

ANGLING?

Either you can have the loudspeakers angled in towards the listener or 

you can have them directed straight ahead. Some loudspeakers sound 

better  when angled, but this may also depend on  reflections from the 

side walls. By angling the  loudspeakers inwards, you decrease unwanted  

reflections and thus you get a better stereo perspective.

THE CORRECT HEIGHT

If the loudspeakers are small, they should be placed on stands or tilted 

so that they are on the same level as the ears. 

Содержание 99.36 FLR














Отзывы: