47
②
Go to Network interface and then click “Ethernet Connected” to check the internet
connection of Apple PC.
③
After acquiring the IP address, Subnet Mask and so on, please go to the NVR’s Main
Menu
Setup
Network interface to manually input IP address, Subnet Mask and
Gateway according to the configuration of PC. The network segment should be the same
as the PC. If using DHCP, please enable DHCP in the NVR and router.
④
After finishing the above information, users can enter LAN IP and HTTP port in the
Safari browser. For example: input http://192.168.1.100:81(here 192.168.1.100 is LAN
IP of NVR, 81 is the HTTP port of NVR). Click “
” button, the browser will
download ActiveX control as shown below.
⑤
Click
icon and then select the Active X control, the welcome interface will be
shown. Click “Continue”
“Install” button, the following window will pop up.
Input the name and password of Apple PC and then click “OK” to install this Active X control.
