NVR Quick Start
8
WWW.XTSCORP.COM
Notice:
Attention: select mode according the connected IP camera channels and resolution,
after changing the model,click save and reboot the device.
When the image is good in 9/16/25/26 screen modes, after double click the image to zoom, if the
image is stuck or becomes a black screen change to 1080 mode to solve it.
Systerm version:
check the system version and time, when doing a software update, need to
check version first to avoid updating failure and damage the device.
6.5.2 Channel Information
Click
【
Setting
】
Channel
Video
Parameters, to adjust IP camera preview and
recording resolution.
1)
Encoding Type:
Main Stream (Normal), Sub
Stream, Main Stream (Event) for selection
Main Stream
：
double click to show single image or
full screens image are mainstream, also recording
playback is mainstream.
Sub Stream
：
9/16/25/36 screens display are using sub stream, IE or mobile viewing are sub
stream also.
Main Stream (Event)
：
motion detection and alarm trigger recording are using this
2)
Stream Type
：
video, video & audio two type for selection. When connected with audio, please
select video & audio mode, or there is no audio when playback.
3)
Resolution
：
NVR will get IP camera main stream and sub stream resolution automatically,
when the image is not good, you can adjust from here according to necessity.
4)
Bitrate Type
：
set variable bit rate and constant bit rate.
5
）
Bitrate:
set the bit rate upper limit for coding main stream are 1080P: 6000kbps, 720P:
4000kbps ; set the bit rate upper limit for coding sub stream is 512-1024kbps
6
）
Frame Rate
：
suggest to set full frame 25/30
7
）
Video Quality:
suggest to select highest. When all the IP cameras connected with NVR are
same brand, after finish setting 1
st
channel, can click
Copy To
to apply the setting to all channels,
then click
Save
.
7.1 Recording
7.1.1 Manual Recording
Right click to bring main menu, click
【
Record
】
to enter record setting.
Manual recording has the highest priority, after performing
Manual
, the
