Xtrons D711G, Руководство пользователя

Страница: 13 / 32

13
wheel wires, (Note: some cars have three pieces of wires, others have two pieces), then,
connect it to the grounding wire of three pieces of steering wheel wires drew forth from the
main unit. If your car's steering wheel has three pieces of wires, connect the other two pieces
of key wires to the rest two pieces of key wires drew forth from the main unit, you can
connect them at will; if your car's steering wheel has two pieces of wire totally, you can
connect the rest one to any piece of the rest two pieces of key wire drew forth from the main
unit;
2. Supply the power to turn on the unit after you confirm the steering wheel connection
wires all correct, press the setup button of upper right corner in the screen to enter setup
menu;
3. Press the center of direction setup button in the top of setup menu, the steering wheel
setup menu will bound out;
4. After steering wheel setup menu bound out, press text button firstly, you will see sample
figure of A and B displayed in information box, this is the initial figure that the main unit get
sample to car's steering wheel.
5. Then, press the following key "cancel" firstly to clear all keys. Note: you must press this
key to clear all previous setting before every to change setting.
6. And then, you can make the keys learn. after you press the top function key, the
information box will prompt "PLS PRESS KEY" to prompt user to press key of car's steering
wheel that need to define. when you have pressed the key of car's steering wheel, the
information box will display the key figure that you pressed, that means the key has been got
sample by main unit, then, you can learn the next key till finish all keys learning.
7. When complete the learning, you need to press "complete" to save the key you have
learned and start steering wheel function, if you didn't press "apply" key after finished
learning, before you will study will make invalid processing.
8. If you don't want it after finish learning, press "cancel" to cancel it, at the same time,
close the steering wheel function.
9. If you think that some keys' sample figures are very close during learning and it's easy to
mistake code, press exchange two wires, means exchange previous two pieces of wires from
car steering wheel to unit drew forth. If the car's steering wheel just has one piece of wire,
please connect the key wire of steering wheel to the other wire of unit, then return to the first
step to learn.
10. Maybe there are several keys in car's steering wheel, you can define by yourself, make
the key function of steering wheel and key function in menu correspondence, and finish
learning. You can ignore it if a key in menu but not in steering wheel, it won't influence
normal use. You just need to learn the keys which are in steering wheel's OK.
11. You can also enter setup menu and press "cancel" to close steering wheel function after
finish learning steering wheel. After closed the steering wheel will have no function. If you
need to turn on steering wheel function, please return to the first step and re-learn to setup.