True Stealth™ Installation Guide
Copyright © 2007 Xtreme Tek Audio. All Rights Reserved.
2
Figure 1
3.1.
Left Trim
Next, remove the left rail bezel trim. To do this, slide you hand behind the trim, locate the
clip, and squeeze both sides together (Figure 2). Push the clip outward and pop out the edge.
Once you have the front of the bezel popped out, slide the bezel towards the rear of the car,
it some come off at this point.
Figure 2
3.2.
Right Trim
Now, remove the remaining bezel on the right side. To do this, reach to the back of the
bezel and pry the trim at the rear away from the bezel by putting you hand around the edge
(Figure 3). Then, being careful not to break the bezel, pull it towards the rear of the car.
