True Stealth™ Installation Guide
Copyright © 2007 Xtreme Tek Audio. All Rights Reserved.
1
1.
Prerequisites and Preparation
Prerequisites for install:
•
A working stereo head unit feeding a signal to an amplifier
•
An appropriate amplifier for the subwoofer used
•
Appropriate wiring run to the carpet opening under the passenger seat
Tools required for install:
•
13mm Socket Wrench (bolt removal)
o
Both deep socket or ratchet-hole will work
•
Torque Wrench (bolt reinstallation)
2.
Quick Install Overview
This section provides a very brief overview of the steps. It is not recommended that you use
this section as your sole installation instructions. Each section provides detailed information
on each step and failure to execute the details could result in a damaged product.
1.
Slide the passenger seat forward
2.
Remove rear rail trim
3.
Remove rear bolts
4.
Slide the seat back
5.
Remove front bolts
6.
Position seat so bottom is accessible
7.
Bend in metal clips
8.
Fasten wires against the seat bottom with zip ties
9.
Attach wires to subwoofer
10.
Place box in, widest rail on passenger door side
11.
Bring the seat back down
12.
Reinstall bolts and rail covers
3.
Removing Rail Trim
The first step is to remove the rail covers that cover the bolts to remove the seat.
First, slide the passenger seat all the way forward (Figure 1).
