XtremeMac Luna Voyager, Руководство пользователя

Страница: 5 / 11

6 7
9. No naked flame sources, such as lighted candles, should be
placed on the apparatus.
10. Protect the power cord from being walked on or pinched—
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Do not install in an area which impedes the access to the
power plug. Disconnecting the power plug is the only way to
completely remove power to the product and must be readily
accessible at all times.
12. Power source—Use only the power supply that is included
with this unit. Do not substitute with any other power supply.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped. For service, refer to qualified
service personnel, return to the dealer, or call the XtremeMac
service line for assistance.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus complies with Canadian ICES-003.
1. Auto time set switch
2. OFF|12|24 hour switch
3. Line-in
4. Power jack
1. Battery Compartment
1. Universal dock well
2. Control wheel
Settings/Volume/Snooze
3. Alarm button
4. Clock
Play/Pause Button
5. LED display