8
IMPORTANT: BEFORE YOU BEGIN
1.
For TOUCH SENSITIVE CONTROLS, please DO NOT PRESS. A light touch and hold on the required button for a matter of a (1) one second is all that is
needed.
2.
T
OUCH THE ENTIRE BUTTON: See illustration on right:
1. FOR PX02 & PX06 Model:
TYPE 1: TOUCH SCREEN CONTROL PANEL
Importance Notice:
1. AUTO FUNCTION ACTIVE: Once “Auto Function” is on or touched, all other functions will be DE-ACTIVATED and will NOT be
working.
2. 2 ½ HOUR AUTOMATIC SHUT OFF: This range hood will be shut off for every approx. 2 ½ hours. You can re-start operation
usual after it was shut off.
3. SCREEN TURN OFF: This range hood is equipped with remote control and smoke sensor that will self-calibrate within 5 seconds
when the range hood is first electrically activated. Self-calibration will be set when the range hood beeps. LCD panel WILL TURN
OFF automatically after a period of inactivity and every time when plugged into electrical outlet.
A. A
CTIVATING
N
ORMAL
B
LOWER
F
UNCTION
:
While the range hood is off,
Touch
(+) to start from lowest speed, F1
Touch
(-) to start from Highest speed, F4
Touch (+) or (-) again to change the blower speed as indicated in LCD panel
B. Activating Light Function:
Touch
Light
button to turn the lights on or off.
C. Activating Power-Off Delay Function:
1. While the range hood is on and the blower is running in normal mode, touch
Power-Off Delay
button to activate delay off timer.
2.
Adjust to desired period of delay of timer by touching (-)
or (+)
button quickly (1-15 minutes). Timer begins to countdown immediately, when it
reaches 0, the blower will shut off.
3.
Display screen will show flashing clock if timer is working.
D. Activating Smoke Detector Function:
While the machine is off, touch
Auto Function
button to activate the smoke detector auto function mode.
NOTE: this function will only worked when there’s a lot of smoke. Once this button is touched, all other buttons are not active.
E. Changing the clock (only available in some models)
While the blower is off:
1. Touch power sign once. The hour indicator will be flashing.
2. Use (+) or (-) to adjust to the desired hour.
3. Touch power sign again for the “minutes”. Indicator will be flashing.
4. Use (+) or (-) to adjust to desired minutes.
5. Touch power sign again to clear the screen. Touch light button to validate. To check time, touch light button.
NOTE: The clock display is only available for product manufactured after October 2013.
For best results, Start the range hood before
cooking and allow it to operate several minutes
after the cooking is completed to clear all smoke
and odors from the kitchen.
11. RANGE HOOD OPERATION
00 = blower off
F1 = quiet speed
F2 = low speed
F3 = medium speed
F4 = high speed
INCORRECT
VS.
Button is NOT completely covered
.
Entire button covered and lightly touched.
CORRECT
