Xtreme XR842 Скачать руководство пользователя

Страница: 35 / 80

Operation Manual

Operator Cab

Operation Manual

Seat Belt

Warning

Always check the condition of the seat belt

and mounting hardware before operating the

forklift. If the seat belt or mounting hardware

is defective, it may not properly restrain

the operator, which could result in death or

serious injury.

•

DO NOT operate the forklift until the seat belt or

mounting hardware is replaced, if worn or damaged.

•

The seat belt MUST be worn while operating the forklift.

Failure to wear the seat belt could result in death or

serious injury.

The forklift is equipped with a standard two inch (2”) wide

retractable seat belt. A three inch (3”) wide retractable seat

belt is available where required by local laws and regulations.

Figure 22. Retractable Seat Belt

Warning

DO NOT adjust the seat or seat belt while the

forklift is moving. Keep both hands on the

wheel while the forklift is moving to prevent

loss of forklift control which could result in

death or serious injury.

Before starting the engine, adjust the seat for position and

comfort (refer to the Operator Seat section of this manual) and

then adjust the seat belt as follows:

Grasp the free end of the seat belt (located on the left side

of the seat) and make sure the belt webbing is not twisted or

entangled in any portion of the seat assembly.

Pull the retractable seat belt across your lap. Position the

seat belt as low on your body as possible.

Insert the latch plate into the buckle (on the right side of

the seat) until a “click” is heard.

Make sure seat belt retracts snugly across your lap.

Rear View Mirrors

Two (2) adjustable rear view mirrors are provided to aid the

operator’s rear vision. One (1) rear-view mirror is mounted on

the upper left of the operator’s cab.

Figure 23. Cab-Mounted Mirror

Содержание XR842
















































































Результаты поиска

Содержание XR842

Отзывы:

Похожие инструкции для XR842

Бренды по названию

Популярные бренды

Xtreme XR842, Инструкция по эксплуатации и безопасности

Результаты поиска

Содержание XR842

Отзывы:

Похожие инструкции для XR842

Бренды по названию

Популярные бренды