Xtreme xr1245 Скачать руководство пользователя страница 39

Страница: 39 / 76

Operator Cab

Operation Manual

Z. ENGINE WARNING

The Engine Warning Indicator

will be displayed when there is

an engine or DPF fault. Refer to the Operation section, Fig 69.

∑

. LEFT SIDE / RIGHT SIDE OUTRIGGER DOWN

Indicates that the outrigger on the left side and/or the one on

the right side of the forklift is locked in the DOWN position.

. BACKUP CAMERA (OPTIONAL)

R. OIL PRESSURE GAUGE

The Oil Pressure Gauge indicates the engine oil pressure.

Normal engine oil pressure is between 40 and 80 psi. If the

Oil Pressure Gauge shows abnormal readings, stop the forklift,

follow proper shut down procedures, tag forklift with “Do Not

Operate” tags, and have a qualified mechanic service or repair

the forklift

BEFORE

placing it into service again.

S. STOP INDICATOR (

RED

)

The Engine Stop Indicator is displayed with a flashing Engine

Warning Indicator when the engine is either shut down or an

engine shutdown is imminent.

T. CHECK ENGINE/GENERAL WARNING INDICATOR

In case of any engine errors, the general error lamp of the

engine will be activated. Whenever the error lamp is active, a

fault code is stored in the error memory.
Two different states are possible:

•

Solid on

- Errors that allow continuing engine operation

with minor restrictions.

•

Blinking

- Errors that cause an engine shut down or shut

down request.

Emission related errors of the EAT system will also be dis-

played on the Status Display and the malfunction indicator

will come on.
The Check Engine Indicator will be displayed when there is a

minor engine or ESC fault. Refer to the Operation section on

Warning Indicators and Fault Codes

and the Engine Indica-

tor Chart (Fig. 69).

U. EXHAUST SYSTEM CLEANING (ESC) INDICATOR

The Exhaust System Cleaning (ESC) Indicator will be displayed

when a manual regeneration is recommended or required.

Refer to the Operation section on

Warning Indicators and

Fault Codes

and the Engine Indicator Chart (Fig. 69).

V. HIGH EXHAUST TEMPERATURE (HEST)

The High Exhaust Temperature (HEST) indicator will be

displayed when the exhaust temperature is higher than

normal. Refer to the Operation section on

Warning Indicators

and Fault Codes

and the Engine Indicator Chart (Fig. 69).

W. ESC REGEN DISABLED

The ESC Regen Disabled indicator will be displayed if the ESC

Regen has been manually disabled by the user.

X. MESSAGE / STATUS DISPLAY

Displays engine status messages or additional warnings.

Y. ENGINE SHUTDOWN

The Engine Shutdown will be displayed when there is a severe

engine or ESC fault. Refer to the Operation section on

Warning

Indicators and Fault Codes

and the Engine Indicator Chart.

Display Features

The display allows the operator to view vital engine

information and other critical functions, including gauge

display, engine diagnostics to monitor engine condition and

performance, fault codes, and warning lights.

POWER UP

When the ignition is turned on, the display powers up and

defaults to GAUGE DISPLAY mode. The display should remain

in this mode for normal operation.

Fig 30. Power Up

Soft Buttons

Menu Button

Enter Button

MAIN MENU

Pressing the MENU button will bring up the MAIN MENU.

Pressing the MENU button again, or the GAUGE DISPLAY soft

button, will return to the GAUGE DISPLAY mode.

Fig 31. Main Menu

Содержание xr1245













































































Результаты поиска

Содержание xr1245

Отзывы:

Похожие инструкции для xr1245

Бренды по названию

Популярные бренды

Xtreme xr1245, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание xr1245

Отзывы:

Похожие инструкции для xr1245

Бренды по названию

Популярные бренды