Xtreme xr1245 Скачать руководство пользователя страница 38

Страница: 38 / 76

Operator Cab

Operation Manual

I. REAR AXLE LOCKED

The Rear Axle Locked Indicator illuminates when the forklift

is in the axle lock mode. The rear axle locks when the parking

brake is set to ON (engaged), or the transmission is in NEUTRAL

or the service brake is applied, and when the boom is above

100. If the Rear Axle Locked Indicator does not illuminate

when the forklift is in the axle lock mode, stop the forklift,

follow proper shut down procedures, tag forklift with “Do Not

Operate” tags, and have a qualified mechanic service or repair

the forklift

BEFORE

placing it into service again.

J. REAR AXLE CENTERED

The Rear Axle Centered Indicator will be displayed when the

rear wheels are aligned perpendicular to the rear axle. The rear

wheels should be centered before changing steering modes.

L. TACHOMETER

The Tachometer indicates engine RPM using a 0-2500 RPM an-

alog dial and also using digital RPM readout at the bottom of

the tachometer display

M. HOURMETER

The Hourmeter indicates and records engine operating

hours. Use the Hourmeter to establish a forklift maintenance

schedule.

N. DEF GAUGE / LOW DEF LEVEL INDICATOR

The DEF Gauge indicates the quantity of fluid in the Diesel

Exhaust Fluid (DEF) tank. The total capacity of the DEF tank is

5 gallons.

The DEF tank should be filled after every fuel refill.

DEF should be added when the Low DEF (Diesel Exhaust Fluid)

Level indicator is displayed. Refer to the Operation section

Warning Indicators and Fault Codes

and the Engine

Indicator Chart (Fig. 69).

O. ENGINE TEMP GAUGE AND HIGH TEMP INDICATOR

The Engine Temp Gauge indicates the temperature of the

coolant in the engine cooling system. After starting the fork-

lift, allow time for the Engine Temp Gauge to begin moving

before operating the forklift. After the engine has sufficiently

been warmed up, normal engine coolant temperature should

read between 1800 to 2000 F.

P. VOLTAGE GAUGE

The Voltage Gauge indicates the amount of charge (in Volts).

Normal system voltage is between 12.5 and 14 Volts. If the

voltage gauge shows abnormal readings, stop the forklift,

follow proper shut down procedures, tag forklift with “Do Not

Operate” tags, and have a qualified mechanic service or repair

the forklift

BEFORE

placing it into service again.

Q. FUEL GAUGE AND LOW FUEL INDICATOR

The fuel gauge indicates the approximate quantity of fuel in

the tank. The total capacity of the fuel tank is 72 gallons.

A. HIGH HYDRAULIC OIL TEMP

The hydraulic oil temperature indicator illuminates when the

oil temperature is above 1800 F (820 C). If the hydraulic oil

temperature indicator illuminates, stop and idle the engine

to allow time for cooling. If the hydraulic oil temperature

indicator does not go out after five (5) minutes, stop the forklift,

follow proper shut down procedures, tag the forklift with “Do

Not Operate” tags, and have a qualified mechanic service or

repair the forklift

BEFORE

placing it into service again.

B. WATER IN FUEL

The Water in Fuel Indicator will be displayed when water is

detected in the fuel filter. Drain the water by opening the

petcock on the bottom of the fuel filter.

C. LOW BRAKE PRESSURE

The Low Brake Pressure indicator illuminates if the hydraulic

oil pressure gets too low. If the Low Brake Pressure indicator

is illuminated, do not release the parking brake or engage

transmission until the indicator is out. If the indicator does not

go out, stop the forklift, follow proper shut down procedures,

tag forklift with “Do Not Operate” tags, and have a qualified

mechanic service or repair the forklift

BEFORE

placing it into

service again.

D. LOW OIL PRESSURE

The Low Oil Pressure Indicator will be displayed when the en-

gine oil pressure is below normal (10 psi or lower). If the Oil

Pressure Indicator comes on during normal operation, stop

the forklift, follow proper shut down procedures, tag forklift

with “Do Not Operate” tags, and have a qualified mechanic

service or repair the forklift

BEFORE

placing it into service

again.

E. LOW COOLANT LEVEL

The Low Coolant Level Indicator will be displayed when the

coolant level in the surge tank drops below normal. Add

coolant to the top of the sight gauge of the surge tank.

F. WAIT TO START

The Wait to Start Indicator is displayed when the key switch is

moved to the RUN position. Wait until the indicator goes out

before starting the engine.

G. ENGINE SERVICE REQUIRED

The Engine Service Required Indicator will be displayed when

a maintenance interval has been exceeded.

H. REGENERATION MENU

Pushing the soft button adjacent to the Regen Menu indica-

tor displays the exhaust system regeneration mode with the

available options.

Содержание xr1245













































































Результаты поиска

Содержание xr1245

Отзывы:

Похожие инструкции для xr1245

Бренды по названию

Популярные бренды

Xtreme xr1245, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание xr1245

Отзывы:

Похожие инструкции для xr1245

Бренды по названию

Популярные бренды