Xtreme X-160, Руководство пользователя

Страница: 10 / 17

10
Chamber until the Inner Nose Cone pops off and then remove the silicone ring.
7. Allow two minutes for any gasses to dissipate.
8. Disconnect the battery cable from the housing cable (if not already disconnected
– the cable will be
disconnected when your remove your sea scooter from the carton after purchase) by pressing the locking
feature.
9. Connect the battery cable to the charger cable.
10. Plug the charger into the mains and turn on the supply. Do not
replace the Nose Cone.
11. Charging will take 4 to 6 hours for a fully discharged battery. When
the battery is charging the LED charger light remains on, when the
battery is charged the LED flashes.
12. Unplug the adapter from the mains.
13. Unplug the battery cable from the charger cable and reconnect to
to the Housing Cable.
14. Make sure the seals and sealing surfaces are clean and lubricated
before placing the Inner Nose Cone
– see Figure 7 and 8.
15. Replace the Inner Nose Cone making sure the key is aligned
correctly. See Figure 9.
16. Ensure the Vent O-Ring is fitted correctly. See Figure 10.
17. Screw in the Vent Plug to seal the vent.
18. Replace the Buoyancy Control Chamber.