Xtreme 61038 Скачать руководство пользователя страница 3

WOOD CHIPPER

3

GB

SAFETY

General Safety Rules

Understand Your Machine

Read this manual and labels affixed to the 
machine to understand its limitations and 
potential hazards. 

Be thoroughly familiar with the controls and 
their proper operation. Know how to stop the 
machine and disengage the controls quickly.

Make sure to read and understand all the 
instructions and safety precautions as outlined 
in the 

Engine Manufacturer

’s manual packed 

separately with your unit. Do not attempt to 
operate the machine until you fully understand 
how to properly operate and maintain the 
engine and how to avoid accidental injuries 
and/or property damage.

If the unit is to be used by someone other than 
original purchaser  or loaned, rented, or sold, 
always provide this manual and any needed 
safety training before operation. The user can 
prevent and is responsible for accidents or 
injuries that may occur to themselves, other 
people, and property.

Wear safety footwear.

Do not remove or tamper with the 
protection and safety devices.

Do not touch parts which are hot 
from operation. Serious burns 
may result.

No smoking, No sparks, No flames.

Keep your hand and feet away 
from moving parts.

Thrown Objects.

Keep bystanders away.

Do not force the machine. Use the correct 
machine for your application. The correct 
machine will do the job more efficiently and 
safer at the rate it was designed. 

Personal Safety

Do not permit children to operate this 
machine at any time.

Keep children, pets, and other people not 
using the unit away from the work area. Be 
alert and shut off unit if anyone enters work 
area. Keep children under the watchful care of 
a responsible adult.

Do not operate the machine while under the 
influence of drugs, alcohol, or any medication 
that could affect your ability to use it properly.

Dress properly. Wear heavy long pants, boots, 
and gloves. Do not wear loose clothing, short 
pants, or jewelry of any kind. Secure long hair 
so it is above shoulder level. Keep your hair, 
clothing, and gloves away from moving parts. 
Loose clothes, jewelry, or long hair can be 
caught in moving parts.

Protect eyes, face, and head from objects that 
may be thrown from the unit. Always wear 
safety goggles or safety glasses with side 
shields when operating.

Wear appropriate hearing protection.

Always keep hands and feet away from all 
moving parts during operation. Moving parts 
can cut or crush body parts.

Always keep hands and feet away from all 
pinch points.

D o   n o t   t o u c h   p a r t s   t h a t   m i g h t   b e   h o t 
from operation. Allow parts to cool before 
attempting to maintain, adjust, or service.

Stay alert, watch what you are doing, and use 
common sense when operating the machine.

Do not overreach. Do not operate the machine 
while barefoot or when wearing sandals or 
similar lightweight footwear. Wear protective 
footwear that will protect your feet and 
improve your footing on slippery surfaces. 
Keep proper footing and balance at all times. 
This enables better control of the machine in 
unexpected situations.

Inspect Your Machine

Check your machine before starting it. Keep 
guards in place and in working order. Make 
sure all nuts, bolts, etc., are securely tightened.

36060UK00M100_BS.indd   3

2019/8/28   14:44:13

Содержание 61038






















Отзывы: