Xtreme Power 90154, Инструкция по эксплуатации и правила безопасности

Страница: 6 / 16

5
OPERATION
Introduction: CFPT Salt Chlorinator
The CFPT chlorine generator, by electrolysis, creates chlorine to sanitize your pool from the salt molecules
(NaCL) in your water. A small electric charge is applied across a set of titanium plates inside the Electrolytic
Cell. This produces Sodium Hypochlorite (NaOCl). In water, Sodium Hypochlorite dissociates into sodium
(NA+) and hypochlorite (OCl-) ions. It is the hypochlorite ions that form with the hydrogen (H+) ions (from
the water) to form hypochlorous acid (HOCl), which is the active agent that destroys bacteria and algae, and
oxidizes organic matter. This form of chlorine works quickly in the pipe, leaving only a mild residual in the pool.
In addition, the Electrolytic Cell continuously “shocks” the incoming water- burning off any oils, organic matter,
or other particles that need to be oxidized.
Best of all, the process continuously recycles the salt: after cleaning the pool, the original molecules reform
and the whole process begins again. The salt doesn’t get used up!
CFPT Salt Chlorinator consist of Cell unit and Power Center
Cell unit has LED screen readings and buttons and also
temperature sensor and salt level sensor to produce chlorine
at the defined output. If the salt level in the pool water is too low
or too high, the Red LED will be on, the cell is turned off until
salt or water is added to the pool. CFPT has a self-cleaning
cycle which reverses polarity, reducing calcium buildup. This
feature turns the cell on and off at regular intervals to minimize
calcium and scale buildup and further maximizes cell life.