Xtreme Power 50115 Скачать руководство пользователя страница 5

4

SAVE THESE WARNINGS

IMPORTANT SAFETY INFORMATION

Blades must be rated to at least the maximum speed marked on the tool.

Maintain labels and nameplates on the tool. These carry important safety information.

Avoid unintentional starting. Prepare to begin work before turning on the tool.

DO NOT

 lay the tool down until it has come to a complete stop. Moving parts can grab the surface and 

pull the tool out of your control.  

When using a handheld power tool, maintain a firm grip on the tool with both hands to resist starting 

torque.

DO NOT

 leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug 

it from its electrical outlet before leaving.

Use clamps (not included) or other practical ways to secure and support the workpiece to a stable platform. 

Holding the work by hand or against your body is unstable and may lead to loss of control.

This product is not a toy. Keep it out of reach of children.

Verify that there are no utility lines or hardware in or near the workpiece. This is especially critical for 

plunge cuts.

DO NOT

 depress the spindle lock when starting or during operation.

People with pacemakers should consult their  physician(s) before use. Electromagnetic fields in close 

proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. In addition, 

people with pacemakers should:
• Avoid operating alone.
• 

DO NOT

 use with Trigger locked on.

• Properly maintain and inspect to avoid electrical shock.
• Any power cord must be properly grounded.
Ground Fault Circuit Interrupter (GFCI) should also be implemented – it prevents sustained electrical 

shock.

The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible 

conditions and situations that may occur. It must be understood by the operator that common sense and 

caution are factors which cannot be built into this product, but must be supplied by the operator.

Vibration Safety:

 this tool vibrates during use. Repeated or long-term exposure to vibration may cause 

temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk 

of vibration-related injury: anyone using vibrating tools regularly or for an extended period should first 

be examined by a doctor and then have regular medical check-ups to ensure medical problems  are not 

being caused or worsened from use. Pregnant women or people who have impaired blood circulation to 

the hand, past hand injuries, nervous system disorders, diabetes, or Raynaud’s Disease should not use 

this tool. If you feel any symptoms related to vibration (such as tingling, numbness, and white or blue 

fingers), seek medical advice as soon as possible.

Содержание 50115













Отзывы: