Date: 2007-05-18
Page: 7 of 11
Version 1.1
Instructions for Connecting the Battery Pack(s)
z
First disconnect the UPS from mains and loads before attempting an
External Battery Cabinet installation. Both Battery circuit breakers
(located in the back) must be “OFF”.
z
Remove the Steel Cover that over the Battery Connectors on Rear Panel
of External Battery Pack, and on Rear Panel of UPS.
z
Use the battery cable provided with the External Battery Cabinet to
connect the External Battery Pack to the UPS Unit.
z
If More than one Battery Pack are to be connected, then Connect the
second Battery Pack to the first one with the Battery Cable provided with
the second Battery Pack.
z
Please check and set UPS parameters to match the Battery Pack quantity
installed when using external Battery Packs.
Rear Panel View of 700VA ~ 1500VA UPS and EBP (6 pcs Batteries):
