Xtreme Power Conversion M90S Series, Руководство по обслуживанию

Страница: 20 / 29

Xtreme Power Conversion Corporation
M90S Service Manual
Page 20
Uninterruptible Power Supply
Figure 2 M90S power module LCD main interface
1) UPS Mode: Current Operation Mode.
2) it will display the UPS running status mode and parallel information as refer to below table.
information
N New module
M Master
S<n> Slave, <n> means the number
3) UPS Measurement Data.
4) When alarms happen, the warning or fault information will display. When UPS in Battery mode or
Battery Test mode, the backup time will display.
5) When the front panel is not operated for 2 minutes, the display page will return back to home page;
6) Press the “UP” or “DOWN” button to enter menu;
7) When it displays home page in LCD, if UPS is in bypass or standby, you could press the “ON/ENTER” button to
turn on the UPS to line / converter / ECO / battery mode according to the setting and input status;