www.XtremeAirUsa.com
PAGE
10
A. Activating Normal Blower Function:
B. Activating Light Function:
C. Activating Power-Off Delay Function:
D.
Activating Smoke Detector Function:
E. Changing the clock:
While the blower is off:
1.
Touch power sign once; the hour indicator will flashing
2.
use (+) or (-) to adjust to designed hour
3.
Touch power sign again; the “minutes” indicator will flashing
4.
use (+) or (-) to adjust to designed minutes
5.
Touch power sign again to clear the screen. Touch light button to validate. To check time, touch light
button.
Note: The clock display is only available for product manufactured after October 2012.
E. Remote Control Sensor:
2. TYPE 2: TOUCH BUTTON CONTROL (For other than PX06-I36 & PX06-I42)
Button functions
:
• While the range hood is off,
Touch
(+) to start from lowest speed, F1
Touch
(-) to start from Highest speed, F4
Touch (+) or (-) again to change the blower speed as indicated in LCD panel
00 = blower off
F1 = quiet speed
F2 = low speed
F3 = medium speed
F4 = high speed
• Touch
Light
button to turn the lights on or off.
1.
While the range hood is on and the blower is running in normal mode, touch
Power-Off Delay
button to activate delay off timer.
2.
Adjust to desired period of delay of timer by touching (-)
or (+)
button quickly (1-15 minutes).
Timer begins to countdown immediately, when it reaches 0, the blower will shut off.
3.
Display screen will show flashing clock if timer is working
• While the machine is off, touch
Auto Function
button to activate the smoke detector auto function mode
NOTE: this function will only worked when there’s a lot of smoke. Once this button is touched, all
other buttons are not active.
1.
Remote control sensor receives infrared (IR) signal from the remote control. The
maximum distance for IR data transmission is 3 meter and requires direct line of
sight. The transmission distance may vary depending on temperature and remote
control battery condition.
1.
Light settings are independent from other settings (including power-off delay) and
lights have to be manually turned on or off.
2.
The system saves user configurations, settings such as light, timer and blower
(motor) speed will remain the same the next time it is turned on.
