Printer stops checking
: This is for printer stops checking, when the product
passes by, the :ilshould reflect, or the sensor maybe broken and need to be replaced.
CHAPTER 6 ADJUSTMENTS
6.1 Readjustment for seal fittings
(al
Dislocation gap
I
(bl
(1) Make sure that the seal fittings are set as shown in Figure (a).
Dislocation gap
( C)
(2) Adjust the seal fittings as follows if they are positioned as shown in Figure (b) or (c):
1. Turn the o shape belt by hand and cling the left and right sealer, and loose the L-seal
fixed bolt
2. Loosen the fixed bolt, and
turn
the o shape belt to open the press arm slightly. When
the tension arm is opened, the L-seal can be moved
3. Put the left and right sealer together tight. When both sides are engaged properly,
close the tension arm slowly and lock the fixed bolt.
6.2 Adjustment on the photocell:
1. Readjustment on the detection position of the photocell is to ensure that the distance
from the photocell detection point to the horizontal seal center of the hot sealer is a whole
number times of the proportion strip length. That is, the photocell aligns with the
registration mark, where and when the hot sealer just makes a horizontal seal precisely.
2. Lens of the photocell is in a distance of about 3mm to the packing film. When the film
is being fed the photo spot must detect a registration mark. After the photocell has
detected a registration mark, the photocell's function indicator should show a change such
that if the checked mark is in light color, the indicator will not tum on. The indicator only
turns on when a dark color is checked up. Otherwise, the sensitivity knob has to be
readjusted. If the base color is in a little difference with the registration mark, the
sensitivity of the photocell should be readjusted once more in order to avoid erroneous
action.
XtraVac RBF8 Rotary Bagger Operation, Service, & Parts Manual
XtraVac Packaging Machines
RBF8 - Rotary Bag Filling & Sealing Machine
419 E. 11th Ave. North Kansas City, MO 64116 USA
+1 800-728-2999 • [email protected]
