Xtralis ADPRO Presidium, Инструкция по установке и эксплуатации

Страница: 61 / 122

ADPRO Presidium by Xtralis Installation and User Manual
Doc. 12384_05
49
2. Once the connection to the Presidium is established, the Password screen is displayed
(refer to Section 4.4.3)
Presidium Mini
1. The Presidium Mini requires connection to two consecutive IP Address on Port Number 80.
The default addresses are 192.168.1.3 and 192.168.1.4 (on Port 80)
2. While some network configurations may allow the use of two IP Addresses, other simple
network configurations such as xDSL may not. To allow connection via simple xDSL
services for example, the Port Redirection feature of the xDSL Router (connected to the
Presidium Mini) can be used. This will cause two public ports to be redirected to the private
Port 80 utilised for both addresses. Refer to Figure 40 for an example using a DrayTek
xDSL Router of redirecting two public ports (in this example Port 81 and Port 82) to Port 80.
3. Once the router has been configured at both end s of the network, enter the xDSL IP
Address and the first Port Number for the Remote Public Network (within the Presidium
Setup Utility) and select the
Connect button.
Note: The Presidium Mini IP Addresses can be change to suit the setup of the respective
network.
The Presidium Mini Port Address cannot be changed.
Figure 40: Port Redirection Example
4. Once the connection to the Presidium is established, the Password screen is displayed
(refer to Section 4.4.3)