manualshive.com logo in svg

Xtralis ADPRO Presidium, Инструкция по установке и эксплуатации

Поделиться
Скачать
Xtralis ADPRO Presidium Скачать руководство пользователя страница 38

Installation and User Manual

ADPRO Presidium by Xtralis

26 

Doc. 12384_05

•

Execute tests in each detection area based on the type of intrusion, and where possible 
differing environmental conditions, e.g. day/night/dusk/dawn. Ensure that the alarm 
activation is reported as expected at the Presidium system, and also that any third party 
system triggered from the Presidium system receives an alarm notification.

•

If the system is installed in a high security installation, then tests with different types of 
camouflaged clothing should also be performed.

Soak Tests

Once the system has been installed and the detection tests performed, then the system must be 
monitored for its performance in relation to the ambient environment. Changes in environmental 
conditions, or just routine actions can produce nuisance alarms. The system should be 
monitored on a daily basis prior to going 'live' to highlight issues of concern, and then adjust the 
Presidium parameters as required. Every time detection parameters are modified, detection tests 
should be performed again to ensure the detection performance has not been compromised.

Once the performance of the soak tests has reached an acceptable level, and the detection 
performance is as required, the system can go 'live'.

2.7.3 System Tests

Typically Presidium is an element of a larger system. The integration and performance of 
Presidium as a system component must be verified to ensure the complete system behaves as 
required and expected. There are a number of areas to check:

•

For remote monitoring, ensure that generated alarms are successfully transmitted to the 
Central Monitoring Station.

•

If functions such as Access/Secure are being used within Presidium, test that the behaviour 
meets expectation and the system generates alarms when it is armed.

•

If the Presidium is integrated into a larger matrix or CCTV system, ensure that any inputs/
outputs to/from the larger CCTV system function as expected.

2.7.4 Recording System Configuration

Once all the Presidium channels have been configured, the configuration details should be 
saved. Selecting the 

Save to File

 button on the Presidium Setup screen will cause all settings 

currently within the software to be saved to the PC (a confirmation box will be presented to verify 
the required action). 

This enables the complete configuration to be saved. This may then be reloaded in the case of a 
system malfunction or used to configure another system.

The configuration is saved as a .settings file in a user defined location on the PC.

Selecting the 

Load from File

 button enables the saved configuration to be uploaded to the 

connected Presidium.

2.8

Site Maintenance

This section covers the following five areas of system maintenance and management:

•

Routine Maintenance

•

Routine Site Maintenance

•

Routine Equipment Maintenance

•

Routine Detection Tests

•

Maintenance to Regulatory Requirements

Содержание ADPRO Presidium



























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды