Xtracycle Hooptie, Руководство пользователя

Страница: 7 / 10

7
04 C
Once your Hooptie rail or rails are installed, use a 5 mm Allen
wrench to tighten down the bolts under the brackets. Tighten
the bolts until there is no wiggle or play in the brackets when
you apply pressure. The torque should be about 12-13 nM.
04 B
Place a spring washer on one of the M5 x 28 mm bolts.
Thread the bolt by hand through the boss on the Hooptie
bracket. Use a 4 mm Allen wrench to tighten the bolt through
the bracket and into the Hooptie rail. Repeat this step for the
other bracket.
04 D
Reattach the WheelSkirts / FreeLoader Too.