background image

 

 
 

 

User Manual XC Tracer V1.0 

 

Rev 01 22.2.2016 

XC Tracer Configuration File 

Connect XC Tracer to a computer using a Micro USB Cable and once connected, switch the 
device on by briefly pressing the red button until you hear a beep-beep-beep. XC Tracer is 
now running in USB-MSD (Mass 

Storage Device) mode. XC Tracer’s internal Micro SD Card 

will appear as an external drive in Windows Explorer or the Mac Finder. You will find a PDF 
copy of the user manual on the SD card, and also the XC_TRACER.TXT configuration file. 
Editing this file in Notepad (Windows) or Text Editor (Mac) allows you to adjust XC Tracer

’s 

settings. The various options are described below: 

# XC Tracer Configuration File 

serialNumber=20C38FE9E556 

Serial number of XC Tracer, is used for the IGC logger. 

firmwareVersion=XC_Tracer _V1.0_R01 

 

Indicate

s the device’s firmware version. 

reset=no

 

 

Setting 

reset=yes

 resets XC Tracer to the factory default settings. In order for this to work all 

the entries below 

reset=yes

 must be deleted, otherwise the same settings will be read in 

again. Reset=no is the default setting. 

# supported Bluetooth protocols are None, XCTRACER, LK8EX1, LXWP0, FlyNet, and 
BlueFly 

Select the BLE protocol her. NB. Only one protocol can be selected at once. Please check at 

www.xctracer.com

 which protocol to choose for your app.  

bluetoothProtocol=LXWP0 

In this case the LXWPO protocol will be will be used. 

forwardGPSSentences=yes 

With 

forwardGPSSentences=yes  

the NMEA strings from the GPS will be sent directly over 

BLE. Again, please check at 

www.xctracer.com

 if this is necessary of not for your App. 

# supported log formats are None, IGC, and KML 

Here you can choose the log format that will be saved on the SD card. You can log nothing, 
or you can log a signed IGC file for XC Contest and the like, or you can log a KML file that 
you can import directly to Google Earth. IGC files are logged at 1Hz, and KML files are 
logged at 5Hz, meaning that position and altitude will be logged 5x per second. 

logFormat=KML 

With 

logFormat=KML 

you will record a KML file. With 

logFormat=IGC

 wou will log an IGC file, 

and with 

logFormat=None

 nothing will be recorded.

 

logOnlyWhenFlying=yes 

Содержание XC Tracer V1.0











Отзывы: