User Manual XC Tracer V1.0
Rev 01 22.2.2016
Battery Indicator
After switching the device on the battery charge status is indicated with a sequence of short
beeps:
5x Beep means that the battery is charged 95% or more.
4x Beep means that the battery is charged 75% or more.
3x Beep means that the battery is charged 55% or more.
2x Beep means that the battery is charged 35% or more.
1x Beep means that the battery is charged 15% or more.
When the battery is less than 15% charged you will hear a constant beep for one second
after switching the device on.
After indicating the battery charge XC Tracer
’s GPS now searches for a fix. A beep-beep-
beeeeeep indicates that the device is now ready for flight.
Adjusting The Volume
XC Tracer has 4 volume settings: Mute, gentle, medium and loud. You can change the
volume setting with a short push of the red button, always from mute
– gentle - medium –
loud
– mute – gentle etc.
Charging the battery
You can charge the battery using the Micro USB cable that was shipped with XC Tracer. A
red LED indicates that the device is charging. Once fully charged the red LED turns off and
the green LED turns on. The red and green LEDs are only used for indicating charging
status. These LEDs are only on when XC Tracer is connected to a power source.
Low battery power
XC Tracer’s low-voltage detection will switch the device off if the battery voltage drops below
3.3V. (NB. The log file is written to the SD card before the device turns off).
