Xtool IP616 Скачать руководство пользователя

Страница: 2 / 76

Please read this user manual carefully before using the IP616 Smart

Diagnostic System. When reading the manual, please pay attention to the

words “Note” or “Caution”, and read them carefully for appropriate

operation.

RADEMARKS

is a registered trademark of Shenzhen Xtooltech Intelligent

CO., LTD.

In countries where the trademarks, service marks, domain names, logos

and the name of the company are not registered, XTOOL claims that it still

reserves the ownership of the unregistered trademarks, service marks,

domain names, logos and the company name. All other marks for the

other products and the company’s name mentioned in the manual still

belong to the original registered company.

You may not use the trademarks, service marks, domain names, logo and

company name of XTOOL or other companies mentioned without written

permission from the trademark holder.

XTOOL reserves the right to the final interpretation of this manual content.

OPYRIGHT

Without the written consent of Shenzhen Xtooltech Intelligent Co., Ltd.,

any company or individual shall not copy or backup this operation manual

in any form (electronic, mechanical, photocopying, recording, or other

forms).

Содержание IP616













































































Результаты поиска

Содержание IP616

Отзывы:

Похожие инструкции для IP616

Бренды по названию

Популярные бренды

Xtool IP616, Руководство пользователя

Результаты поиска

Содержание IP616

Отзывы:

Похожие инструкции для IP616

Бренды по названию

Популярные бренды