Xtool D1, Руководство пользователя, Страница: 3 / 26

Follow the operating principles:
￮
Check the machine for damage every time before you use it. Do not operate it in any
way when any damage or defect is found.
￮
Ensure that the workspace is clean and flat. Note that the laser tube is made of glass
and is very fragile. If it is broken, the machine fails to work.
￮
Do not disassemble the machine or change its structure in any way without
authorization. Do not modify or decompile its operating system.
￮
Keep the operating area of the machine clean. Residues and chippings accumulated
during cutting and engraving are dangerous and may cause fire. Clean the machine
regularly.
￮
The machine works properly at the temperature of 0°C to 35°C and can be stored
properly at the temperature of 0°C to 45°C. Do not operate it at a temperature lower than
0°C.
2. Laser safety
xTool D1 has no protective cover. Do not touch the laser when operating the machine.
Follow the safety precautions:
￮
Do not operate the machine when any part of it is removed. Removing any part may
cause damage to the machine.
￮
Do not engrave or cut any material that contains PVC or vinyl (plastic materials are
not recommended). These materials (and other materials containing chlorine/chloride)