USING
Attention!
You must abide by the following basic safety measures against electrical shocks, injuries and
danger of fire when using electric tools. Read and abide by there instrucitons before you start
to use any.
These instrucitons mut be kept in a safe place.
- The equipment must never be used in surroundings where an explosive atmosphere exists.
- Do not let the cable touch any parts of your body.
- Only use the extension cable appproved for use in the working area.
- Do not force the machine for unsuitable work, for example, rough grinding, brushing, etc. dangers and harms
will be caused
- Only use identical replacement parts when servicing. Otherwise, risk-free operation can´t be
- The accessories allowed speed must be at least the same as the maximum speed of the machine. Or they may
be broken or cracked when their running speed is go over the machine ´s allowed speed.
- Do not use damaged accessories. Before use, always check whether the accessories are nicked or
For example, to grinding pad, please check the support plate is not cracked. Ensure everybody to be the machine
´s rotation area and run the machine at max. speed for one minute, which can fully test the accessories.
- Do not put down the machine when it isn´t stopped completely. Otherwise, you will loss control to the
machine.
- Cleaning the exhaust port on your machine in regular. When working, control the machine firmly with both
hands to ensure safe operation.
- When sanding, do not use too big sanpaper. When choosing grinding disc, please observe manufacturer´s
specifications. The sand paper beyond the grinding block leads to risk of cutting and cause stuck as well.
- The machine can be connect to one extension tubes at most.
- We recommend that you always wear industrial safety gloves ande safety goggles when working with drywall
sander.
- Wearing close-fitting clothes is mandatory.
-Always allow for reaction torque
- Wear protection mask P2 to protect you from hazardous dusts and choose suitable vacuum cleaner.
How to use drywall sander
Before setting up, repair or maintence of the appliance you must always turn off the operating switch and pull
out the mains plug!
Before Initial operation
-check if the rated frequency of the mains supply corresponds to the details of the type place.
-before using the tool, read the instruction book carefully
Hot installation
- connect aluminium claw and rotary pin with threaded pin, tho hose and the flexible shaft are screwed into the
threaded hole of the small and shell (1-1)
1-1
