d
e
f
Please NOTE: the shaft should keep still before operating this step.
Step
4:
1. Press the stand according to the arrow(g.)
to narrow down the angle
2. Position the belt onto the triangular stand.
g))
Direction of pressing the stand
Step
5:
1. Install the Auxiliary handle base to the
side of the gear box
2. Screw it tightly
h))
Auxiliary handle base
h
NOTE: both sides are available for the handle
Before assembling or removing the attachment,unplug the angle grinder from the power source. If
it is a cordless angle grinder,first remove the battery.
1. Wear safety goggles or glasses while polishing and a dust particle mask when appropriate.
2. Make sure the belt and stand is in good condition.Dul l belt wil l bind
3. Ensure that the material you are sanding is firmly anchored in place.
4. The tube polishing attachment should be instal led properly.All parts should be screwed up
firmly.This ensures safe control of the tool.
5. Slowly bring down the sanding belt until it contacts the material and begins polishing.Adjust
motor speed to ensure a smooth,clean operation. Do not over-force the belt into the material.This can
cause the belt to bind and even break
6. Always choose the right belt for proper materials. Do not sanding on the materials that is not
recommended, which wil l damage the tools and even get yourself hurt.
Maintenance
1. Before each use, clean off the drive shaft. Make sure it has no dirt, grease, or debris
clinging to it.
2. All that is required to keep the attachment in excel lent working condition is to wipe it
down after each use to clear away any debris and particles.
3. Store it in a cool, dry location, out of reach of children.
Step
3
1) Press the spindle lock button to make sure that the
spindle stays still.
2) Add the drive wheel to the shaft
3) Screw it tightly with the wrench.
d) Spindle lock button
e) Drive wheel
f) Wrench
g