Depending on the operations, you can set the angle of the handle either 45°or 90°position on left or
right. To turn the handle, press the steering button and turn the handle as shown in the figure. The
handle is locked in 45°position. To turn the handle to 90°position, press the steering button again and
turn the handle more.
Switch action
CAUTION: Before inserting the battery packs into the tool, always check to see that the switch
handle, handle button and push rod actuates properly and returns to the "OFF" position when released.
For your safety, this tool has a dual switching system. To turn on the tool, press the push rod and press
the switch handle and handle button (you can release the push rod after pressing down the switch
handle). To turn off the switch, release switch handle or handle button . The tool only starts when
pulling both switch handle and handle button.
OPERATION
CAUTION:
Be careful not to accidentally contact a metal fence or other hard objects while trimming. The blade
will break and may cause serious injury.
Overreaching with a hedge trimmer, particularly from a ladder, is extremely dangerous. Do not work
from anything wobbly or infirm.
Do not attempt to cut branches thicker than 10 mm diameter with this trimmer. These should first be
cut with shears down to the hedge trimming level.
CAUTION
Do not cut off dead trees or similar hard objects. Failure to do so may damage the tool.
Switch
handle
Push
rod
handl
e
butto
n
