manualshive.com logo in svg
background image

1

SAFETY HINTS

IMPORTANT: THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY

SAFETY PRECAUTIONS

Thank you for purchasing our product.  Even though we go to  great efforts to ensure the quality of 
each product, occasional errors and/or omissions do occur.  In any event should you find this product 
to be defective or missing a part please contact our Customer Service Department.

Your treadmill was designed and built for optimum safety.  However, certain precautions apply
whenever you use your treadmill. Be sure to read the manual before assembly and operation. 
Also, please note the following safety precautions:

DANGER:

    To  reduce  the  risk  of  electric  shock,  always  unplug  the  treadmill  from  the  electrical

outlet immediately after using and before cleaning.

1. Read OWNER OPERATING MANUAL and all accompanying literature and follow it carefully
    before using your treadmill.
2.  If  dizziness,  nausea,  chest  pains,  or  any  other  abnormal  symptoms  are  experienced  while  using 

this equipment, STOP the workout at once.  CONSULT A PHYSICIAN IMMEDIATELY.

3.  Never leave the treadmill unattended  when  plugged  in.   Unplug  from  the outlet  when not in  use 

and before removing or replacing parts.

4. Never operate the treadmill if it has a damaged cord or plug, if it is not working properly, if it has 

been dropped, damaged, or exposed to water.

5. Do not pull the treadmill by the power supply cord or use cord as a handle.  Keep cord away from 

heated surfaces and open flames.

6.  Fitness  equipment  must  always  be  installed  and  used  on  a  flat  surface.    Do  not  use  outdoors  or 

near water.

7. Do not insert any objects into any openings.
8. Keep children and pets away from this equipment at all times while exercising.
9. Handicapped individuals should have medical approval and close supervision when using this
    treadmill.
10.Do not place hands or feet under the treadmill.  Always keep  hands and legs off of the treadmill 

when others are using it.

11.Never turn on treadmill while standing on treadbelt.  Always return the treadmill to slow speed to 

provide for safe dismount and low speed restart.

a-To disconnect, turn all controls to the off position, then remove plug from outlet. 
b-Use the treadmill only for it is intended use as described in this manual.
c-Warm  up  5  to  10  minutes  before  each  workout  and  cool  down  5  to  10  minutes  afterward.  This 

allows your heart rate to gradually increase and decrease and will help prevent straining muscles.

d-Never hold your breath while exercising.  Breathing should remain at a normal rate in conjunction 

with the level of exercise being performed.

e-Start your program slowly and very gradually increase your speed and distance. 
f-Always wear suitable clothing and footwear while exercising.  Do not wear loose fitting clothing
   that could become entangled with the moving parts of your treadmill.
g-Do not walk or jog barefoot, in stocking feet or loose fitting shoes or slippers.
h-Care must be taken when  lifting  or moving  the equipment, so  as not to injure your back.  Always 

use proper lifting techniques.

WARNING:

Before beginning any exercise program consult your physician. This is especially

important for individuals over the age of 35 or persons with pre-existing health problems.  Read
all instructions before using any fitness equipment.  We assume no responsibility from personal
injury or property damage sustained by or through the use of this product.

CAUTION!! Please be careful when opening this unit.

AT90E-NT33CEGS_1403(XL)A

Содержание Trail Racer TR3.0



















Отзывы: