background image

                                                                                                                                                                          TR6.5 Treadmill                                                                     

 

 

 
WARNING!

 

NEVER 

use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any 

appliance with a large motor, the GFCI will trip often. Route the power cord away from any 
moving part of the treadmill including the elevation mechanism and transport wheels. 

NEVER 

remove any cover without first disconnecting AC power. If voltage varies by ten percent 

(10%) or more, the performance of your treadmill may be affected. 

Such conditions are not 

covered under your warranty. 

If you suspect the voltage is low, contact your local power 

company or a licensed electrician for proper testing. See Diagnosis Guide, page 26. 

NEVER 

expose this treadmill to rain or moisture. This product is 

NOT 

designed for use outdoors, 

near a pool or spa, or in any other high humidity environment. The temperature specification is 
40 degrees c, and humidity is 95%, non-condensing (no water drops forming on surfaces). 

Circuit breakers: 

Some circuit breakers used in homes are not rated for high inrush currents that 

can occur when a treadmill is first turned on or even during normal use. If your treadmill is tripping 
the house circuit breaker (even though it is the proper current rating) but the circuit breaker on the 
treadmill itself does not trip, you will need to replace the home breaker with a high inrush type. This 
is not a warranty defect. This is a condition we as a manufacture have no ability to control. This 
part is available through most electrical supply stores. Examples: Grainger part # 1D237, or 
available online at 

www.squared.com

 part # QO120HM. 

 

 

This product must be grounded. 

If the treadmill’s electrical system should malfunction or 

breakdown grounding provides a path of least resistance for electric current, reducing the risk of 
electric shock. This product is equipped with a cord having an equipment-grounding plug. The 
plug must be plugged into an appropriate outlet that is properly installed and grounded in 
accordance with all local codes and ordinances. 

DANGER - Improper connection of the equipment-grounding conductor can result in a 
risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt 
as to whether the product is properly grounded. Do not modify the plug provided with the 
product if it will not fit the outlet; have a proper outlet installed by a qualified electrician. 
 

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the 
plug illustrated below. A temporary adapter that looks like the adapter illustrated below may be 
used to connect this plug to a 2-pole receptacle as shown below

 

if a properly grounded outlet is 

not available. The temporary adapter should be used only until a properly grounded outlet, 
(shown below) can be installed by a qualified electrician. The green colored rigid ear-lug, or the 
like, extending from the adapter, must be connected to a permanent ground such as a properly 
grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal 
screw. 

 
 
 
 

 
 
 

Important Electrical Information 

 

Grounding Instructions

 

 

 

 

Grounded Outlet 

Grounding Pin 

Grounded Outlet Box 

Metal Screw 

Adapter 

Tab of 

Grounding 

Screw 

Содержание TR6.5

























Отзывы: