Xterra TR6.45 Скачать руководство пользователя

Страница: 18 / 28

TR3.0 Treadmill

1. Select User 1 or User 2 via the Program key then press

Enter

. Note that the dot matrix will

show a single row of dots at the bottom of the display (Unless there is a previously stored

program).

If there is a program stored under the key that is pressed, it will be retrieved. If not, you

have the option of programming in your first name. The Display will flash the letter ”A” . To

change it, press the

key, then “B” will be displayed; if the

key is pressed, the letter

“Z” will be displayed. After selecting the appropriate letter, press enter. The letter “A” will

again be displayed and blinking. Repeat the procedure until all letters of your first name

are programmed (7 characters maximum). When your name is displayed, press Stop and

it will be stored under either User 1 or User 2.

2. If

Enter

was pressed, the Display will now be blinking a value, indicating your Age (default

is 35). Entering your correct age affects the Heart Rate Bar Graph Display and the Heart

Rate programs. Use the

keys to adjust, then press

Enter

. (Note: You may press

Start

at any time during the programming to start the program.)

3. The Display will now be blinking a value, indicating your Body Weight (default is 150 lbs.).

Entering the correct body weight will affect the calorie count. Use the

keys to adjust,

then press

Enter

4. The Display will be blinking a value, indicating Time (the default value is 30 minutes). You

may use any of the

keys to adjust the time. After adjusting, or to accept the default,

press

Enter

. (Note: You may press

Start

at any time during the programming to start the

program).

5. The Display will now be blinking the preset top speed of the selected program (0.5 mph or

0.8 kph). Use the

Speed

keys to adjust, then press

Enter

. Each program has vari-

ous speed changes throughout; this allows you to limit the highest speed the program can

reach.

6. The Display will be blinking the preset top incline of the selected program (0%). Use the

Incline

keys to adjust, then press

Enter

You are now done programming data and may press

Start

to begin your workout or

Enter

go back one level to change data entered in the programming phase.

User Programs

Содержание TR6.45




























Результаты поиска

Содержание TR6.45

Отзывы:

Похожие инструкции для TR6.45

Бренды по названию

Популярные бренды

Xterra TR6.45, Руководство пользователя

Результаты поиска

Содержание TR6.45

Отзывы:

Похожие инструкции для TR6.45

Бренды по названию

Популярные бренды