background image

SB120 Recumbent Bike

19

Button Functions

MODE

: Press to select functions. Press the button and hold for two seconds to reset all     

functions to zero, except ODOMETER.

Key Functions

SCAN:

   Press MODE button until “▼” appears at SCAN position, the console displays: time, 

speed, distance, calories, odometer and pulse, in sequence for 6 seconds at a time

TIME: 

Displays the time from exercise start to the end

SPEED: 

Displays the current speed

DISTANCE:

 Displays the distance from exercise start to the end

CALORIES:

  Displays the calories burned from the exercise start to the end.

The calorie readout is an estimate for an average user. It should be used only as comparison 

between workouts on this unit.

ODOMETER

: Display the total accumulated distance you have traveled. The odometer does 

not reset unless you remove the batteries.

PULSE: 

Displays an average current heart beat rate in beats per minute (BPM). To use this 

feature, place hands on the pulse grips and hold for 6 ~ 7 seconds to get a more accurate 

reading.  

Please note that due to contact delay, the heart rate will be higher than the actual heart 

rate during the first 2 ~ 3 seconds of measurement, then will return to normal level. The 

measurement value shouldn’t be regarded as the basis of medical treatment.

Содержание SB120

























Отзывы: