background image

FS5.8e Elliptical

3

WARNING!

•  NEVER

 remove any cover without first disconnecting AC  

power supply.

•  If A.C. voltage varies by ten percent (10%) or more, the performance 

of your elliptical may be affected. Such conditions are not covered 

under your warranty. If you suspect the voltage is low, contact your 

local power company or a licensed electrician for proper testing.

•  NEVER

 expose this elliptical to rain or moisture. This product is NOT 

designed for use outdoors, near a pool or spa, or in any other high 

humidity environment. Maximum  

environmental ratings are 40-120 degrees Fahrenheit, 95% humidity 

non-condensing (no water droplets forming on surfaces).

•  NEVER

 operate this elliptical without reading and completely understanding the results of 

any operational change you request from the computer.

•  Understand that changes in resistance do not occur immediately. Set your desired level on 

the computer console and release the adjustment key. The computer will obey the  

command gradually.

•  NEVER

 use your elliptical during an electrical storm. Surges may occur in your household 

power supply that could damage elliptical components.

•  Use caution while participating in other activities while using your elliptical such as  

watching television, reading, etc. These distractions may cause you to lose balance,  

resulting in serious injury.

•  Always hold on to a handlebar while making control changes.

Important Electrical Instructions

Important Operation Instructions

The FS 5.6e has an exciting electronic incline feature that will increase the variety of your 

workouts. When the incline is at its lowest position you get a traditional elliptical workout. As 

the incline increases you will feel your knees rise higher with each step, which changes the 

emphasis of the muscles being used. The power incline is controlled by keys on the console 

and also automatically during the built-in workout programs.

Incline Adjustment

The elliptical is equipped with transport wheels, which are engaged when the rear of the 

elliptical is lifted.

Transportation

Features

Power Switch / Plug-In

Содержание FS5.4





























Отзывы: