Customer Service 1-888-707-1880
Dyaco Canada Inc
6
5. Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.
6. Tell others about the risk associated with button batteries and how to keep their children safe.
a) Always purchase the correct size and grade of battery most suitable for the intended use.
b) Replace all batteries of a set at the same time.
c) Clean the battery contacts and also those of the device prior to battery installation.
d) Ensure the batteries are installed correctly with regard to polarity (+ and -).
e) Remove batteries from equipment that is not to be used for an extended period of time.
f) Remove used batteries promptly.
Note: The console cannot operate if battery is inserted backwards.
Note: Rower is not suitable for therapeutic purposes.
ERG650W
PRE-ASSEMBLY
Use the following procedures to unpack and assemble your rower manufactured by
Dyaco Canada Inc.
Position the shipping carton so the heavy end is located at the bottom
Cut the straps then lift the box over the unit and unpack. Remove foam inserts and all
parts from the shipping carton, then use the parts list to verify that all parts are
included in your shipment.
Locate the hardware package. The hardware is separated into steps. Remove the
tools first. Remove the hardware for each step as needed to avoid confusion. As you
read through the assembly instructions, any number that is in brackets [#] refers to the
item number from the corresponding assembling drawing
NOTE: All tools required to assemble the rower are included within the packaging.
NOTE: If you are missing any of the parts listed above, inspect the packing material and the
box for items that may have been overlooked.
If parts are missing, or if you have any operational questions, please call Dyaco Canada Inc.
customer service department. Have your serial number ready.
CAUTION: Damage to the rower during assembly is not covered as part of the limited Xterra
Fitness warranty. Take care not to drop or lean the rower on its side. Carefully stand the
rower up in the normal upright position on a stable surface so it will not tip over during
assembly
Protect the environment by not disposing of this product with household waste. Check your
local authority or approved waste center for recycling advice and facilities
