CUSTOMER SERVICE 1-888-707-1880 Dyaco Canada Inc.©2014
10
2
Connecting & Lower Swing Arms
1.
Put Lower Handle Bars (L) and (R), (4) and (5), at each side of
Console Mast shaft and secure with 2pcs of 5/16" × UNC18 ×
15L_Button Head Socket Bolts (151) and 2pcs of Ø8.5 × Ø26 ×
2.0T_Flat Washers (147) by using Combination M5 Allen Wrench
& Phillips Head Screw Driver (108).
2.
Release and take apart Pedal Axle (17) on left Pedal Arm (2) and
install left Connecting Arm (7) onto left Pedal Arm. Tighten the
screw together with the previously released Pedal Axle with 12/
14mm wrench (111). Repeat the same procedure again for the
right Connecting Arm (8) and Pedal Arm (3).
3.
Release rod end shafts (16) which are on left and right connecting
arms(7.8). Connect the left and right connecting arm(7.8) with left
and right lower handle bar(4.5) and secure with rod end shafts
(16) and the screw by using 12/14mm_Wrench (111).
