Customer Service 1-888-707-1880
Email: [email protected] - 6 -
Maurice Pincoffs Canada Inc.
©
2010
STEP 2
1. Attach the end caps
(63)
to the rear stabilizer
(6).
Secure using four screws
(85)
and
two levelling caps
(64)
.
2. Attach the rear stabilizer
(6)
to the bracket of the rear frame
(5).
Secure using two
carriage bolts
(72)
, two spring washers
(100)
, two flat washers
(103)
as shown in the
diagram
.
3. Connect the back handpulse wire
(43)
from the rear frame
(5)
to the computer wire
(25)
from the front frame
(1)
.
4. Insert the front frame
(1)
into the rear frame
(5).
Secure on both sides of the frame
using
four allen head bolts
(74),
four spring washers
(101)
and four curve washers
(99)
.
5. Tighten the bottom of the rear frame
(5)
with three allen head bolts
(75).
6. Attach the levelling cap
(68)
to the front frame
(1)
.
NOTE:
Ensure that you fasten the bolts securely to avoid shaking and discomfort when
cycling.
Once your cycle is assembled, use the levelling caps (64 / 68) to level your cycle.
Rear Frame(5), is
inside of Rear
Covers(65, 66)
PDF created with pdfFactory trial version
www.softwarelabs.com