Customer Service 1-888-707-1880
Email: [email protected] - 13 -
Maurice Pincoffs Canada Inc.
©
2010
COMPUTER OPERATION
STEP 1: POWER ON Ensure that the adaptor is plugged into the socket found at
the bottom of the front frame.
Pedaling or press any button.
STEP 2: SELECT PROGRAM
Press the program buttons until the desired program is displayed.
STEP 3: SET THE PROGRAM TIME (AND INPUT AGE FOR HEART RATE CONTROL
PROGRAMS)
Press the
ENTER
button, the
TIME
function mode will appear with the display
flashing
“
0:00
”
.
Press the
ENTER
button again to pass setting the program time. Or use the
program buttons to set the program time, from 5 minutes up to 99 minutes with 1
minute increments.
Press the
ENTER
button to confirm the setting. Press the
START/STOP
button
to start the program.
NOTE
:
1. The program will not start until you press the START / STOP button.
2. If you don
’
t set the program time, the computer will count up from one second up to
99:59 minutes, and use the default workout time, 30 minutes, to cycle run the
program profile.
3. The computer will count down from the program time that you set. When the timer
counts down to zero, the computer will alert you with an audible alarm that your
workout is complete. You can press any button to stop the audible alarm.
OPERATION DESCRIPTION
1. To stop a running program, press the
START / STOP
button. In this mode, you can
press the
START / STOP
button again to continue to run the current program. Or,
you can use the program buttons to select a new program. The function values of
DISTANCE
and
CALORIE
will continue to accumulate.
2. When you complete a program, press the
START / STOP
button to stop the
program. You can use the Program buttons to select a new program. The function
values of
DISTANCE
and
CALORIE
will continue to accumulate. This will allow you
to run several programs and still know the total
DISTANCE
and
CALORIE
during
the workout.
3. If you want to restart with a new program, press the
START/STOP
button to reset
all of the function values to zero. Use the program buttons to select a new program.
4. The computer will shut off automatically after 4 minutes of inactivity, and the
function values,
DISTANCE
and
CALORIE
, will be kept.
PDF created with pdfFactory trial version
www.softwarelabs.com