CUSTOMER SERVICE 1-888-707-1880 Maurice Pincoffs Canada
©
2012
24
MAINTENANCE MODE:
DO NOT STAND ON TREADMILL
If you want to set the Speed and Distance to Metric or if there is a problem with the
speed and you would like to perform the calibration procedure, use the Maintenance
Mode. To enter Maintenance Mode press and hold the Start and Fast keys for 5
seconds, while installing the safety key.
•
The large display window will now be showing Grade Return, make sure this
function is turn on and press Enter
•
The large display window will also display the setting for M (miles) or K
(Kilometers). Press the
Fast/Slow
key to change between M and K.
•
The large display window will now be showing the Roller size. Roller size is
used for the calibration process and should be set to 63
•
To run the calibration procedure, press the Start key.
o
The display will show a number for the lowest speed setting (for miles
the number should be 0.5). Adjust the low speed setting with the
Fast/Slow keys and press Enter.
o
The display will show a number for the top speed setting (for Miles it
should be 12.0). Adjust the top speed setting and press Enter
o
The display will show a number for the max incline setting (12 for
1640355, 15 for 1640855), then press Start to begin calibration.
o
The belt will start automatically and will adjust speeds between low and
high. Be careful because the belt will change speeds without warning.
When the calibration is finished the display will return to the start-up
screen.
