Rec Room Masters www.recroommasters.com
email: [email protected]
page 4
D-INPUT MODE
D-Input Mode is best used for 2 player Raspberry pi gameplay and Retro Pie software.
You can also use it for PC use. During PC use, the controller will show up as 2 individual
gamepads in your Windows Device Manager. This does not affect gameplay.
D-Input is NOT recommended for PC use with Steam games. X-Input is a better choice for
most Steam content, especially modern fighting games.
If you want to switch to D-Input Mode, you will need to hold down the following buttons
for 10 seconds. Simultaneously press and hold the Player 1 Start button and the Player 1 2nd
button for 10 seconds. After 10 seconds, you can release both buttons and wait up to 30
seconds for the desired mode to take effect.
D-INPUT MODE: Player 1 Start (P17) + Player 1 2nd button (P11)
(The buttons shaded in black on image below)
IMPORTANT INFORMATION: The Trackball will work when using a PC however, the
trackball will only work on some versions on MAME in Retro Pie software . Unfortunately, this
is how the 3rd party Retro Pie Software is set up and we have no control over any 3rd party
software. Left and Right Mouse WILL NOT Work on ANY system.
You can also see the helpful video linked below on how to set up a raspberry pi.
HOW TO SET UP A RASPBERRY PI:
https://youtu.be/LGIGfJoTpBQ
D-INPUT MODE (DEFAULT DUAL GAME PAD MAPPING LAYOUT)
Press and Hold The Shaded Buttons for 10 Seconds to Switch To D-Input Mode
IMPORTANT: The Trackball will only work with some
versions of MAME on Retro Pie!
TRACKBALL