Installation of XL-RAID-SATA2-USB
17
2
3.4 An introduction to other functions
3.4.1 LCD monitor operation guide
※
XL-RAID-SATA2-USB
XL-RAID-SATA2-
USB Booting ...
1
PASSWORD
0000
Enter
Enter
6
CHANGE RAID MODE
YES
NO
Down
Up
Pri HDD : OK
Sec HDD : OK
SETUP PASSWORD
YES
NO
Down
XL-RAID-SATA2-USB
3
RAID - 1 V090707.1
Down
SYSTEM TEMP
4
35 C
Down
SYSTEM FAN
4600 RPM
5
Down
1. After power ON and before entering standby screen, click on ENTER key, you will enter into product
function setup options (product default password is: 0000)
2. Upon booting, the standard standby screen will display the hard disk operation status.
3. It will display product model/RAID level/firmware edition.
4. It will display system temperature.
5. It will display fan rotation.
CHANGE RAID MODE
YES
NO
Enter
7
RAID - 0
MODE
YES
NO
DATA WILL LOSE
YES
NO
Enter
Enter
Raid Mode Changed
Pls Reboot Sys
Down
6
Up
SETUP PASSWORD
PASSWORD
PASSWORD : 0000
SETUP PASSWORD
YES
NO
0000
Enter
Enter
8
YES
NO
OK
Enter
6. There are two functional setup options, one of them is RAID level setting, and the other is login
password setting.
7. The factory default setting of RAID level is RAID-1, therefore, upon entering, you will be asked
whether or not to change RAID-0. A change of RAID level would cause the original hard disk data to
get lost, please pay special attention to it.
